Neck Gaiter
A seamless tube. Nothing for the press to fight, nothing to break the pattern — the closest thing to a perfect all-over result we sell.
€12.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Deep navy
Dark substrate — pale artwork will not appear on it.
How it takes the dye
- Polyester content
- 100% — colour lands at full strength.
- Fibre composition
- 100% polyester microfibre
- Weight
- 130 g/m²
- Printable area
- The full tube, edge to edge, with no seam interruption.
- Seam whitening
Low. Few overlapping layers, so the press reaches almost everything. Expect a clean, even result across the piece.
No body seams cross the printable area on this piece.
- Sizes
- One size
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + backNot available
Not offered on this blank. The construction of this piece does not allow it.
- Panel-cutNot available
Not offered on this blank. The construction of this piece does not allow it.
Important — Dark base available
One of the base colours above is a dark substrate. Sublimation dye is translucent — it can only darken cloth, never lighten it — so anything in your file lighter than the blank will not appear. The studio greys those areas out in the preview and counts them against your gamut figure. Why this happens.
Labelling and end of life
- Fibre composition
- 100% polyester microfibre — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 30 °C. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
