Beach Towel 70 × 140 cm
Printed velour on one side, absorbent cotton loop on the other. An honest compromise rather than a clever one.
€29.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Important — Read before ordering
A polyester printing face absorbs noticeably less water than an all-cotton towel. This towel dries you more slowly than a cotton one — that is the trade for a photographic print.
Important — Read before ordering
30% cotton overall. The cotton loop reverse takes no dye at all and stays undyed white.
How it takes the dye
- Polyester content
- 70% — the remaining 30% takes no disperse dye, so colour lands roughly 27% lighter than the same file on a 100% polyester blank.
- Fibre composition
- 70% polyester, 30% cotton; polyester velour printed face, cotton loop reverse
- Weight
- 320 g/m²
- Printable area
- The polyester velour face only. The cotton reverse is not printed.
- Seam whitening
Low. Few overlapping layers, so the press reaches almost everything. Expect a clean, even result across the piece.
Zones — Hem
- Sizes
- 70 × 140 cm
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + backNot available
Not offered on this blank. A polyester printing face absorbs noticeably less water than an all-cotton towel. This towel dries you more slowly than a cotton one — that is the trade for a photographic print.
- Panel-cutNot available
Not offered on this blank. A polyester printing face absorbs noticeably less water than an all-cotton towel. This towel dries you more slowly than a cotton one — that is the trade for a photographic print.
Labelling and end of life
- Fibre composition
- 70% polyester, 30% cotton; polyester velour printed face, cotton loop reverse — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 40 °C. Do not bleach. Tumble dry on low if needed. Iron on the reverse only at low heat (110 °C). Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
