Cushion Cover 45 × 45 cm
A short-pile suede-feel face that holds fine detail better than any jersey in the catalogue.
€19.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Natural
Light substrate — the full tonal range is available.
Charcoal
Dark substrate — pale artwork will not appear on it.
Important — Read before ordering
Cover only. No cushion pad or insert is included.
How it takes the dye
- Polyester content
- 100% — colour lands at full strength.
- Fibre composition
- 100% polyester suede-feel
- Weight
- 230 g/m²
- Printable area
- Front and back faces up to the seam.
- Seam whitening
Low. Few overlapping layers, so the press reaches almost everything. Expect a clean, even result across the piece.
Zones — Edge seam · Concealed zip
- Sizes
- 45 × 45 cm
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + back+€11.00 · min 1
One area on the front face and one on the back face.
- Panel-cutNot available
Not offered on this blank. Cover only. No cushion pad or insert is included.
Important — Dark base available
One of the base colours above is a dark substrate. Sublimation dye is translucent — it can only darken cloth, never lighten it — so anything in your file lighter than the blank will not appear. The studio greys those areas out in the preview and counts them against your gamut figure. Why this happens.
Labelling and end of life
- Fibre composition
- 100% polyester suede-feel — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 40 °C. Do not bleach. Tumble dry on low if needed. Iron on the reverse only at low heat (110 °C). Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
