Lanyard
Narrow, long and completely flat — one of the few items where the print really does reach every millimetre.
€9.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Important — Read before ordering
Contains a metal trigger clip. The clip is a zinc alloy component supplied to us as compliant with the nickel release limits of REACH Annex XVII entry 27; the batch declaration is available on request.
Good to know
Fitted with a safety breakaway at the neck.
How it takes the dye
- Polyester content
- 100% — colour lands at full strength.
- Fibre composition
- Ribbon 100% polyester; trigger clip zinc alloy; breakaway polyacetal
- Printable area
- The full ribbon length, both faces.
- Seam whitening
Low. Few overlapping layers, so the press reaches almost everything. Expect a clean, even result across the piece.
Zones — Clip fold
- Sizes
- One size
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + backNot available
Not offered on this blank. Contains a metal trigger clip. The clip is a zinc alloy component supplied to us as compliant with the nickel release limits of REACH Annex XVII entry 27; the batch declaration is available on request.
- Panel-cutNot available
Not offered on this blank. Contains a metal trigger clip. The clip is a zinc alloy component supplied to us as compliant with the nickel release limits of REACH Annex XVII entry 27; the batch declaration is available on request.
Labelling and end of life
- Fibre composition
- Ribbon 100% polyester; trigger clip zinc alloy; breakaway polyacetal — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 30 °C. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
