Skip to content
02Sportswear · blank only

Team Tracksuit Top

The heaviest blank in the sportswear line, and the one that most rewards panel-cut printing.

Blank price

€49.00

Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.

Team Tracksuit Top, an unprinted 100% polyester tricot blank photographed flat on almond paper.
Base colours
  • Optic white

    Light substrate — the full tonal range is available.

Important — Read before ordering

Full-length zip. The tape cannot be printed, so all-over wrapping is not offered on this blank.

How it takes the dye

Polyester content
100% — colour lands at full strength.
Fibre composition
100% polyester tricot
Weight
220 g/m²
Printable area
Front panels either side of the zip, back, raglan sleeves and stand collar.
Seam whitening

High. Several double-layered or folded areas that the press cannot compress evenly. Whitening along those zones is certain, not merely possible. Panel-cut printing is the way around it.

Zones — Zip tape · Stand collar · Raglan seams · Cuffs

What seam whitening looks like, photographed

Sizes
XS · S · M · L · XL · 2XL · 3XL

Print specifications

Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.

  • All-overNot available

    Not offered on this blank. Full-length zip. The tape cannot be printed, so all-over wrapping is not offered on this blank.

  • Front panel+€7.00 · min 1

    One rectangular area on the front face only.

    How this spec behaves

  • Front + back+€11.00 · min 1

    One area on the front face and one on the back face.

    How this spec behaves

  • Panel-cut+€18.00 · min 12

    Every pattern piece printed flat, then cut and sewn into the garment.

    How this spec behaves

Labelling and end of life

Fibre composition
100% polyester tricot — labelled in accordance with Regulation (EU) No 1007/2011.
Care
Machine wash at 30 °C inside out. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
Care after printing
Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
Origin
The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
Sorting and recycling
Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.

Configure it and the studio will measure your artwork against this blank in particular.

Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.

Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site

More from Sportswear