Compression Long-Sleeve
The stretchiest thing we print. It takes dye well and then distorts it — which is fine if you know in advance.
€35.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Important — Read before ordering
15% elastane. The fabric is printed flat and then stretches on the body, so artwork stretches with it. Circles become ovals across the chest and fine lines thin out. Plan for it.
Good to know
Compressive fit for sport. We make no medical, circulatory or recovery claim about this garment.
How it takes the dye
- Polyester content
- 85% — the remaining 15% takes no disperse dye, so colour lands roughly 14% lighter than the same file on a 100% polyester blank.
- Fibre composition
- 85% polyester, 15% elastane
- Weight
- 210 g/m²
- Printable area
- Whole garment, flatlock seams included.
- Seam whitening
Medium. Some multi-layer construction. Colour thins visibly along the zones listed below, and artwork crossing them will show a break.
Zones — Flatlock seams · Underarm · Cuffs
- Sizes
- XS · S · M · L · XL · 2XL · 3XL
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + back+€11.00 · min 1
One area on the front face and one on the back face.
- Panel-cut+€18.00 · min 12
Every pattern piece printed flat, then cut and sewn into the garment.
Labelling and end of life
- Fibre composition
- 85% polyester, 15% elastane — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 30 °C inside out. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
