Sublimation Zip Hoodie
A zip is a hard stop for a continuous image. We would rather turn the all-over option off than sell you a broken centre front.
€45.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Important — Read before ordering
The zip tape cannot be printed. Artwork is interrupted by an unprinted strip down the centre front, and a continuous all-over wrap is not offered on this blank for that reason.
How it takes the dye
- Polyester content
- 100% — colour lands at full strength.
- Fibre composition
- 100% polyester, brushed back
- Weight
- 280 g/m²
- Printable area
- Front panels either side of the zip, back, sleeves and hood.
- Seam whitening
High. Several double-layered or folded areas that the press cannot compress evenly. Whitening along those zones is certain, not merely possible. Panel-cut printing is the way around it.
Zones — Zip tape · Hood seams · Pocket edges · Underarm
- Sizes
- XS · S · M · L · XL · 2XL · 3XL
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-overNot available
Not offered on this blank. The zip tape cannot be printed. Artwork is interrupted by an unprinted strip down the centre front, and a continuous all-over wrap is not offered on this blank for that reason.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + back+€11.00 · min 1
One area on the front face and one on the back face.
- Panel-cut+€18.00 · min 12
Every pattern piece printed flat, then cut and sewn into the garment.
Labelling and end of life
- Fibre composition
- 100% polyester, brushed back — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 30 °C inside out. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
