Sublimation Hoodie 280 g/m²
The blank people ask for most and the one we warn about most. Heavy, warm, and structurally hostile to an even all-over press.
€39.00
Per piece, VAT included, before printing. Printing is added in the studio and the quantity tier is applied to the combined figure.
Optic white
Light substrate — the full tonal range is available.
Important — Read before ordering
Highest seam-whitening risk in the catalogue. The hood, the pocket edges and the cuffs are all double-layered, so the press cannot reach into the folds. Expect clear white lines along them.
Good to know
Drawcords are supplied undyed and are not printed.
How it takes the dye
- Polyester content
- 100% — colour lands at full strength.
- Fibre composition
- 100% polyester, brushed back
- Weight
- 280 g/m²
- Printable area
- Body, sleeves, hood outer. Pocket bag prints on its outer face only.
- Seam whitening
High. Several double-layered or folded areas that the press cannot compress evenly. Whitening along those zones is certain, not merely possible. Panel-cut printing is the way around it.
Zones — Hood seams · Kangaroo pocket edges · Side seams · Underarm · Cuffs
- Sizes
- XS · S · M · L · XL · 2XL · 3XL
Print specifications
Specs this blank cannot physically take are disabled here and in the studio, with the reason written out rather than hidden.
- All-over+€12.00 · min 1
The whole piece, front, back, sleeves and side seams.
- Front panel+€7.00 · min 1
One rectangular area on the front face only.
- Front + back+€11.00 · min 1
One area on the front face and one on the back face.
- Panel-cut+€18.00 · min 12
Every pattern piece printed flat, then cut and sewn into the garment.
Labelling and end of life
- Fibre composition
- 100% polyester, brushed back — labelled in accordance with Regulation (EU) No 1007/2011.
- Care
- Machine wash at 30 °C inside out. Do not bleach. Do not tumble dry. Iron on the reverse only at low heat (110 °C) — never directly on the printed face. Do not dry clean.
- Care after printing
- Wash inside out at 30 °C. Iron only on the reverse at low heat — never place an iron directly on the printed face, which can glaze the fibre. Do not tumble dry.
- Origin
- The country of manufacture is printed on the sewn-in label of the blank you receive. It varies by production batch, so we do not state a single country here.
- Sorting and recycling
- Carries the Triman sorting mark and falls under the French TLC extended-producer-responsibility scheme operated by Refashion (filière TLC — textiles, linge de maison, chaussures). Sorting instructions and our EPR identifier.
Configure it and the studio will measure your artwork against this blank in particular.
Fibre content, base colour and seam zones all feed the gamut figure, so the number you see is specific to the piece you have chosen — not a generic estimate.
Questions before you order: +33 7 63 04 90 75 · support@trendsseason.site
